2ND GEN MAZDA MX-6 (1993-1997)
ALL POSTS
On my old 1993 Mazda MX-6, I inherited a terrible tint job that was done on the rear and side windows. The tint on the windows had a purple tint to it and it was beginning to bubble all around the borders. This type of failure is characteristic of a poorly done tint job or regular exposure to glass cleaner that has ammonia. I could not stand the look of it any longer, so I went about removing the tint.
One of the things that needed some work on my old 1993 Mazda MX-6 were the leather seats. One of the issues was a destroyed bolster on the driver’s side, which I couldn’t do too much about. The other was that the leather material was quite dirty and stiff. I used Pine-sol to clean and condition the leather afterwards, but it turns out Pine-sol is just too strong of a solution to use for cleaning. My seats stayed pretty stiff, but it sure was clean.
I had a commuter car, but really wanted a car that I would have fun working on. I found this 2nd generation Mazda MX-6 for $800 in non-running condition. After years of working on the car, it was on its 3rd engine and 3rd transmission. This car is how I got my start working on cars.
This is the story of the second car I owned–a car that ended up on its 3rd engine, 3rd transmission, and countless other replaced parts. This 2nd generation Mazda MX6 taught me a whole lot about working on cars.