Tag

HID

Browsing

When I was shopping for replacement HID parts, I found cheaper alternatives on Amazon compared to the more expensive and more well-known brands. Normally, I’d be wary of such brands as they usually tend to be of lower quality and can potentially cause more headaches down the road. However, the cost is significantly less with these budget parts, so I wanted to try some of these budget HID lighting options.

If you’ve ever had a headlight bulb go out on traditional halogen headlights, it’s usually as simple as changing out your bulb with a new one. With HID’s, you can have a HID bulb go out and may need to be replaced as well. However with HID headlights, there are several components that make up the HID headlight system which can fail and require replacement.

It’s a matter of time before the HID bulb on your 2nd Gen Lexus IS350 goes out. Sometimes the failure can be intermittent with it sometimes working and other times not. It can also fail by simply burning out completely. It’s not difficult to replace the HID bulbs on the 2nd Gen Lexus IS350. You just need to make sure you remove a few things in the engine bay that get in the way when replacing the HID bulbs. Removing some of these parts not only provides you with access to the HID bulbs, but it also gives you room to work.

This HID projector retrofit write-up pertains to the ’03-05 model years of the stock 4th generation Toyota 4Runner. These stock halogen headlights work adequately for lighting up the front of the vehicle, but there is much more left to be desired. This is Part 2, which covers the installation of the wiring harness, ballasts, and HID bulbs, as well as the final calibration of the whole setup.